# OBS Encoder Settings: NVENC, AMF, QuickSync and x264

> OBS encoder settings for recording: which encoder to pick (NVENC, AMF, QuickSync or x264), CQP or CRF against CBR, and starting values for bitrate and quality.

Canonical: https://gameclip.io/blog/obs-encoder-settings.md

[OBS](https://gameclip.io/blog/category/obs)

Nemo · November 20, 2026 · 7 min read

The best OBS encoder settings for recording are: your graphics card’s hardware encoder (NVENC on NVIDIA, AMF on AMD, QuickSync on Intel), a quality-based rate control (CQP on hardware encoders, CRF on x264) at a level of about 18 to 23, and a preset in the middle of the range. Use CBR only when you need a fixed bitrate.

These settings live in **Settings > Output**. Switch **Output Mode** to **Advanced** and open the **Recording** tab to see them all. This post is about recording to a file; streaming has different needs.

## Which encoder should you pick in OBS?

The encoder is the part that compresses the video. A hardware encoder runs on a dedicated part of the GPU and leaves the game almost untouched. A software encoder (x264) runs on the CPU the game also needs.

| Encoder | Name in OBS | Runs on | Quality-based rate control | Pick it when |
|---|---|---|---|---|
| NVENC | NVIDIA NVENC H.264 / HEVC / AV1 | NVIDIA GPU | CQP | You have a GeForce card |
| AMF | AMD HW H.264 (AVC) / H.265 (HEVC) / AV1 | AMD GPU | CQP | You have a Radeon card |
| QuickSync | QuickSync H.264 / HEVC / AV1 | Intel GPU | CQP or ICQ | You have Intel graphics or an Arc card |
| x264 | x264 | CPU | CRF | You have no hardware encoder, or CPU to spare |
| Apple VT | Apple VT H264 / HEVC Hardware Encoder | Apple silicon or Mac GPU | Quality setting | You record on a Mac |

OBS only lists the encoders your hardware and drivers offer, so the list on your computer is shorter. If the hardware encoder is missing, update the GPU driver first.

H.264 is the safe codec: every editor and player opens it. HEVC makes smaller files at the same quality and needs an editor that reads it. AV1 is smaller again but only newer GPUs encode it, and editor support is less complete. If you are not sure, record H.264.

## Should you use CQP, CRF or CBR for recording?

Rate control decides how the encoder spends data.

- **CBR (constant bitrate)** spends the same amount every second. It exists for streaming, where your upload speed is fixed. In a recording it wastes data on menus and can starve a busy fight.
- **CQP (constant quantization)** keeps the compression level constant and lets the bitrate follow the picture. Quiet scenes make small files; fights get the data they need.
- **CRF** is x264’s version of the same idea, tuned a little more to what the eye notices.
- **VBR** sits between: a target bitrate with a ceiling.

For a file on your own disk, use CQP (or CRF on x264). You choose a quality and stop thinking about bitrate. The number works backwards: lower means better quality and bigger files, and 0 is lossless and enormous.

## What values should you start with?

| Recording | Rate control | Starting value |
|---|---|---|
| 1080p60, long sessions | CQP or CRF | 21 to 23 |
| 1080p60, footage for a montage | CQP or CRF | 18 to 20 |
| 1440p60 or 4K60 | CQP or CRF | 20 to 23, HEVC if your editor reads it |
| 1080p60, if you must use CBR | CBR | About 40 to 50 Mbps |

Treat these as a first test, not a rule. A fast shooter with foliage needs more data than a card game at the same number. Record a minute of your busiest game, watch it, and move the value by 2 at a time.

In Simple output mode you don’t see these numbers. **Recording Quality** offers **High Quality, Medium File Size** and **Indistinguishable Quality, Large File Size**, which are quality-based presets, and you only choose the encoder.

## How do you set the encoder step by step?

1. Open **Settings > Output** and set **Output Mode** to **Advanced**.
2. Open the **Recording** tab.
3. Under **Video Encoder**, pick the hardware encoder for your GPU. Avoid **(Use stream encoder)**, which ties the recording to your streaming settings.
4. Set **Rate Control** to **CQP** (or **CRF** with x264).
5. Set the quality level: **CQ Level** for NVENC, **CRF** for x264. Start at 20.
6. Leave **Keyframe Interval** on 0 (auto).
7. Pick the preset as described below, click **Apply**, and record a one-minute test.

## What do presets, tuning and multipass do?

The preset trades encoding effort for quality at the same size.

- **NVENC:** presets run from **P1** (fastest) to **P7** (slowest, best quality). P5 or P6 suits recording. **Tuning** should be **High Quality**; the low latency options are for streaming. **Multipass Mode** on **Quarter Resolution** is a good default. The OBS knowledge base says the **Ultra High Quality** tuning added in OBS 31 is not recommended for gaming content.
- **AMF:** the presets are **Speed**, **Balanced** and **Quality**. Start with Quality and drop to Balanced if the recording skips frames.
- **QuickSync:** the **Target Usage** setting plays the same role. Start in the middle.
- **x264:** **CPU Usage Preset** defaults to **veryfast**. Slower presets look better and cost more CPU; go slower only if the game still runs well.

If a recording stutters while the game is smooth, the encoder is overloaded. Go one preset faster, or cap the game’s frame rate a little below your monitor’s refresh rate so the GPU has room. OBS’s Stats window shows the frames skipped by the encoder.

## Do these settings also apply to the Replay Buffer?

Yes. In Advanced output mode the Replay Buffer uses the Recording tab’s encoder, so replays look like your recordings. With CQP or CRF the buffer’s size is limited by a memory setting, explained in the [OBS Replay Buffer guide](https://gameclip.io/blog/obs-replay-buffer).

For the settings around the encoder (format, resolution, audio tracks), see [OBS settings for recording gameplay](https://gameclip.io/blog/obs-settings-for-recording-gameplay). If you are starting from zero, [how to use OBS to record gameplay](https://gameclip.io/blog/how-to-use-obs-to-record-gameplay) comes first.

## Where does GameClip fit?

GameClip is a desktop app for macOS and Windows that turns a gameplay recording into clips: one highlights video and vertical cuts for Shorts, Reels and TikTok. It opens what OBS records (MP4, MOV, MKV), and its OBS mode can start and stop OBS’s recording and mark plays while you play. It does not touch any of the settings on this page: the encoder, the rate control and the quality stay OBS’s, and GameClip’s exports read the original file. So a clean recording here is what makes a clean clip later.

The connection is described in the [guide to connecting OBS Studio](https://gameclip.io/guides/connect-obs-studio), and you can [download GameClip here](https://gameclip.io/download).

## FAQ

### What is the best encoder for OBS recording?

The hardware encoder of your graphics card: NVENC on NVIDIA, AMF on AMD, QuickSync on Intel, Apple VT on a Mac. It records with a small effect on the game. x264 is the fallback when there is no hardware encoder.

### What bitrate should I use for recording in OBS?

With CQP or CRF you don’t set one: pick a level of 18 to 23 and the bitrate follows the picture. If you need CBR, about 40 to 50 Mbps is a reasonable start for 1080p at 60 fps.

### Is CQP better than CBR for recording?

For a local file, yes. CQP holds the quality steady and lets the file size vary. CBR holds the bitrate steady, which matters for streaming and not for a file on your disk.

### What CQP value should I use?

Start at 20. Go down to 18 for footage you will edit heavily, up to 22 or 23 for long sessions where file size matters. Lower numbers mean better quality and bigger files.

### Should I record in H.264, HEVC or AV1?

H.264 opens everywhere. HEVC and AV1 make smaller files at the same quality, but your GPU must encode them and your editor must read them. Test one short file before a long session.

### Why does my OBS recording lag when the game is smooth?

The encoder is not keeping up, usually because the GPU is fully used by the game. Use a faster preset, cap the game’s frame rate, or lower the output resolution, then check OBS’s Stats window for skipped frames.

macOS and Windows

GameClip turns long gameplay into a highlight video and vertical clips.

Mark your plays while you game, set where each starts and ends, and get captioned cuts. Every cut stays editable before you export.

 [Go to the download](https://gameclip.io/download)

**About this article.** Written by Nemo, who builds GameClip. Facts about other apps and platforms were checked on the date above and can change. Spotted something wrong or out of date? [Tell us](mailto:support@gameclip.io).

More in OBS

[OBS](https://gameclip.io/blog/category/obs) Nov 20, 2026 · 7 min

## [OBS Record Separate Audio Tracks: Game, Mic and Discord](https://gameclip.io/blog/obs-separate-audio-tracks)

How to make OBS record separate audio tracks for game, mic and Discord: Advanced output mode, track checkboxes, Advanced Audio Properties, and formats.

[OBS](https://gameclip.io/blog/category/obs) Nov 20, 2026 · 7 min

## [OBS for TikTok: Vertical Recording vs Cutting Afterwards](https://gameclip.io/blog/obs-vertical-recording-for-tiktok)

OBS for TikTok: how to set a 9:16 vertical canvas, when a vertical plugin makes sense, and why recording 16:9 and making vertical cuts later is often easier.

[OBS](https://gameclip.io/blog/category/obs) Nov 20, 2026 · 7 min

## [OBS vs ShadowPlay vs Medal: Which Should You Record With?](https://gameclip.io/blog/obs-vs-shadowplay)

OBS vs ShadowPlay, plus OBS vs Medal: how the three free recorders compare for full sessions and clips as of November 2026, and which one fits you.
