# Connect GameClip to OBS Studio

> Connect GameClip to OBS Studio in two steps: turn on the WebSocket server in OBS, then type the port and password in GameClip. No plugin.

Canonical: https://gameclip.io/guides/connect-obs-studio.md

[Guides](https://gameclip.io/guides) · [OBS Studio](https://gameclip.io/guides#obs-studio)

GameClip 0.3.2 · Updated November 20, 2026 · 4 min read

To connect GameClip to OBS Studio, turn on the WebSocket server in OBS (Tools, WebSocket Server Settings, “Enable WebSocket server”), then in GameClip open the Recorder tab, set “Record with” to OBS Studio, type the port and the password, and press Connect. You do it once. After that the two apps reconnect by themselves.

In this mode OBS records and GameClip drives it and receives the file. GameClip is not an OBS plugin: it is a separate desktop app that talks to the WebSocket server built into OBS.

## What do you need?

|  | Requirement |
|---|---|
| OBS Studio | Version 28 or newer. The WebSocket server is part of OBS since 28, so there is no plugin to install |
| Where OBS runs | On the same computer as GameClip |
| Port | 4455 by default |
| Password | Shown in OBS under “Show Connect Info”, or none if you turn authentication off |

## How do you set up the OBS side?

1. Open OBS Studio.
2. In the menu, open **Tools**, then **WebSocket Server Settings**.
3. Turn on **Enable WebSocket server**.
4. Check the port. It is **4455** by default.
5. Press **Show Connect Info**. It shows the password. Copy it.
6. Confirm and close the window.

If you would rather not use a password, turn authentication off in the same window. Since both apps are on the same computer, either way works.

## How do you set up the GameClip side?

1. Open GameClip and go to the Recorder tab.
2. Under “Record with”, pick **OBS Studio**.
3. Type the port (4455 unless you changed it in OBS).
4. Type the password you copied from OBS. Leave it out if authentication is off.
5. Press **Connect**.

The panel shows “Connected to OBS Studio” with the OBS version. That is the confirmation that both sides can talk.

## Do you have to connect every time?

No. GameClip reconnects by itself every time both apps are open. The order does not matter to you: open OBS and GameClip, and the connection comes back.

## What can you do once it is connected?

- **Record a whole session.** F9 starts OBS’s recording, F10 pauses and resumes, F11 stops. F8 and F7 mark plays. When it stops, GameClip opens OBS’s file as a session with each mark already a clip. See [record with OBS Studio](https://gameclip.io/guides/record-with-obs-studio).
- **Save replays only.** With “Marks also save an OBS replay” on, each mark key tells OBS to save its Replay Buffer, even when nothing else is being recorded. See [OBS Replay Buffer clips](https://gameclip.io/guides/obs-replay-buffer-clips).
- **Keep using OBS as before.** Starting or stopping the recording inside OBS, with its button or its own hotkeys, works the same. GameClip follows.

## What does the connection not do?

To be plain about the limits:

- GameClip does not change OBS settings, scenes or sources.
- It does not stream. If you stream, OBS does that as always.
- OBS has to be on the same computer. A second streaming PC is not supported.
- GameClip’s own capture settings (display, quality, webcam, microphone) do not apply in this mode. The picture and the sound are whatever OBS is set to.

## What if it does not connect?

The usual causes are short: the WebSocket server is off, the port or the password does not match, OBS is older than 28, or OBS is not open. Each one has a fix in [OBS troubleshooting](https://gameclip.io/guides/obs-troubleshooting).

If you have not decided between this mode and the built-in recorder, [recording modes](https://gameclip.io/guides/recording-modes) compares them. And if you do not have the app yet, it is on the [download page](https://gameclip.io/download).

## FAQ

### Do I need to install an OBS plugin?

No. The WebSocket server is part of OBS Studio 28 and newer. You only turn it on.

### Where do I find the OBS WebSocket password?

In OBS: Tools, WebSocket Server Settings, “Show Connect Info”.

### Which port does OBS use?

4455 by default. If you changed it in OBS, type the same number in GameClip.

### Will GameClip touch my scenes?

No. Scenes, sources, the webcam, audio tracks, the encoder and the quality all stay OBS’s.

macOS and Windows

GameClip turns long gameplay into a highlights video and vertical clips.

Record with the app or with OBS Studio, mark your plays, cut each clip on the timeline and export.

 [Go to the download](https://gameclip.io/download)
