Best Clipping Software for Low End PC in 2027
Nemo · · 6 min read
The best clipping software for a low end PC in 2027 is the one that came with your graphics card: the NVIDIA app on GeForce, AMD Software on Radeon. Both encode on the card, not the processor, and add nothing new to install. With integrated graphics, start with Xbox Game Bar, which is part of Windows. Then lower the recording to 720p or 30 fps before blaming the tool.
On a weak PC the settings matter more than the app. A light tool recording at 1440p and 60 fps will hurt more than a heavier one at 720p and 30.
What makes clipping software light?
- A hardware encoder. NVENC on NVIDIA, AMF on AMD, Quick Sync on Intel. Encoding on the processor takes frames from the game.
- A short buffer. A replay buffer holds the last moments in memory or on disk. Thirty seconds costs less than ten minutes.
- Nothing else running. Overlays, a browser-based interface and a second launcher all use memory.
- A modest target. 720p at 30 fps is far cheaper than 1080p at 60, and it is fine for a clip in a group chat.
Which clipping software is lightest?
Details come from each maker’s site, checked on November 21, 2026, except Xbox Game Bar and AMD Software, described as of November 2026.
| Tool | Price | Needs | Why it suits a weak PC |
|---|---|---|---|
| NVIDIA app | Free | A GeForce card | NVIDIA says recording has minimal impact on performance |
| AMD Software: Adrenalin Edition | Free | A Radeon card | Instant Replay on the card’s encoder |
| Xbox Game Bar | Free, built in | Windows 10/11 | Nothing to install |
| Medal | Free; optional Premium | Windows 10+ | Its site says it typically uses 100 to 400 MB of RAM |
| Outplayed | Free with ads | Windows 10/11 and Overwolf | Its site says capture runs on the GPU’s hardware encoder |
| OBS Studio | Free, open source | Windows 10/11 | You control every setting |
| GameClip | $39 once | Windows 10/11 or macOS 13+ | Can do its work after you stop playing |
Why start with your graphics card’s recorder?
Because it is already installed, and it was written by the people who made the encoder.
NVIDIA’s page says Instant Replay saves the last 30 seconds of gameplay and that recording has “minimal impact to performance”. By default Alt+F10 saves the replay. Setup is in how to clip with NVIDIA.
AMD Software has its own Instant Replay for Radeon cards, saved with Ctrl+Shift+S by default. See how to clip with AMD.
In both, open the recording settings and lower the resolution and frame rate if the game stutters with the buffer on.
What if you have integrated graphics?
Use Xbox Game Bar. Turn on background recording in Windows settings, set it to 30 fps and standard quality, and Win+Alt+G saves the last moments. How to clip the last 30 seconds on PC has the exact switches.
Be realistic: on a PC that already struggles to run the game, any recording costs something. If the frame rate matters more than the clip, turn background recording off and record only the sessions you care about.
Are Medal and Outplayed too heavy?
Not necessarily. Medal’s site says the app typically uses 100 to 400 MB of RAM, records at 60 fps by default and lets you always capture the last 30 seconds. Outplayed’s site says its capture runs on your graphics card’s hardware encoder. Outplayed also needs the Overwolf client, which is one more program in memory.
If you have 8 GB of RAM and the game uses most of it, a few hundred megabytes is the difference between smooth and stuttering. Try each with your game before you decide. Medal clips and the best clipping software compare what they do.
OBS Studio is not light by default, but it is the most adjustable. With the hardware encoder, a 720p output and a short Replay Buffer it can be gentle. OBS recording lag shows how to find what is costing frames.
What settings save the most FPS?
Work down this list and stop when the game feels right:
- Switch to the hardware encoder if the tool lets you choose.
- Drop to 30 fps. This halves the encoder’s work.
- Drop to 720p.
- Shorten the buffer to 30 seconds.
- Lower the bitrate. Clips for chat do not need the highest quality.
- Close the tool’s overlay and anything else you do not use.
- Save to a different drive from the one the game loads from, if you have two.
Where does GameClip fit on a low end PC?
GameClip is a desktop app for macOS and Windows that turns a gameplay recording into one highlights video and vertical cuts for Shorts, Reels and TikTok. On a weak PC, the useful part is that its work can happen after you stop playing.
- Record the session with the lightest tool you have: your graphics card’s recorder or Xbox Game Bar.
- Close the game.
- Open the file in GameClip with New session. It reads MP4, MOV, MKV and WebM.
- Cut the plays on the timeline with the Cut tool, trim them, and export.
Nothing from GameClip runs while the game does, so it costs no frames.
It also has its own recorder, with F8 and F7 to mark plays as they happen. That recorder writes the whole session to disk at 1080p and 60 fps by default, which is more work for the PC than a 30 second buffer. We have not published benchmarks for it, so on a low end PC test it with your game first, or use the import route above. Exporting video is also slower on old hardware, whatever the app.
GameClip costs $39 once, with a 7-day money-back guarantee. If all you need is a raw clip, the free tools above are the right answer.
Which should you pick?
- GeForce or Radeon card: the card maker’s app.
- Integrated graphics: Xbox Game Bar at 30 fps.
- You want share links: Medal, after testing it with your game.
- You want edited clips without loading the PC while you play: record light, then download GameClip and cut afterwards.
FAQ
What clipping software uses the least resources?
The recorder from your graphics card’s maker, the NVIDIA app or AMD Software, and Xbox Game Bar. They are already on the PC and use the card’s hardware encoder.
Does clipping software lower FPS?
Yes, a little, because recording uses the encoder, memory and disk. A hardware encoder at 720p and 30 fps keeps the cost small. On a PC already at its limit, you will notice any recorder.
Is Medal good for low end PCs?
It can be. Medal’s site says it typically uses 100 to 400 MB of RAM. On a PC with little free memory, compare it with your graphics card’s recorder in the game you play.
Is OBS good for a low end PC?
With the right settings. Use the hardware encoder, a 720p output, 30 fps and a short Replay Buffer. Left at heavy settings, OBS can cost more than the simpler tools.
Can I clip without recording all the time?
Yes. Turn the replay buffer off and start a recording only for the sessions you want. You can cut the plays out of that file afterwards.