Editing

Video Trimmer: Free Ways to Cut a Video on Any Computer

Nemo · · 7 min read

A video trimmer removes the start, the end, or both from a video and saves what is left. Windows has one in the Photos app and a Mac has one in QuickTime Player, both free. For one short clip, that is all you need. A three-hour gameplay recording with ten good moments in it is a different job.

What does a video trimmer do?

Three words get used for the same button, and they mean slightly different things:

  • Trim: move the start or the end of a video inward. One file in, one shorter file out.
  • Cut: remove a piece from the middle, or keep one piece from the middle. A “video cutter” usually means a trimmer that can also do this.
  • Split: break one video into two or more parts at a point you pick.

There is also a difference in how the result is saved. Most trimmers re-encode: they decode the video and compress it again, which takes time and costs a little quality. A few tools copy the original stream without re-encoding. That is fast and lossless, but the cut can only land on a keyframe, so the start may be off by a fraction of a second or more.

Which free video trimmers are worth using?

All of these cost nothing for a plain trim as of November 2026.

Trimmer Runs on What it does Limit to know
Photos (Trim) Windows 11 Drag two handles, save a copy One start and one end per save
Clipchamp Windows 11, browser Timeline with trim and split Free plan exports up to 1080p
QuickTime Player macOS Edit > Trim, drag the yellow handles One piece per save
Photos macOS Trim inside the photo library Video has to be in the library
iMovie macOS Timeline, split, several clips in one movie A project per video
LosslessCut Windows, macOS, Linux Cuts without re-encoding, many segments Cuts land on keyframes
Online trimmers Any browser Upload, drag handles, download Upload time and file size caps

The step-by-step versions are in how to trim a video on Windows and how to trim a video on Mac.

How do you trim a video with what is already on your computer?

On Windows 11:

  1. Open the video in Photos.
  2. Click Trim at the top (or press Ctrl+E).
  3. Drag the two handles to the part you want.
  4. Click Save as Copy. The original stays as it was.

On a Mac:

  1. Open the video in QuickTime Player.
  2. Choose Edit > Trim (or press Command-T).
  3. Drag the yellow handles to the part you want and click Trim.
  4. Choose File > Save and give the trimmed copy a name.

Both take well under a minute for a short file.

Are online video trimmers a good idea?

For a small file, yes. Clipchamp runs in a browser, and Adobe Express, Canva and Kapwing each have a trim tool on their sites. Nothing to install, and they work on a Chromebook or a borrowed computer.

Two things make them a poor fit for gameplay. The first is size: an hour of 1080p60 gameplay is often several gigabytes, and uploading it just to keep 30 seconds is slow. The second is the free tier, which on most of these sites limits length, file size, resolution or adds a watermark. Those limits change often, so read the export screen before you spend time on an edit. If the footage is on your disk already, a desktop trimmer is faster.

When is a video cutter not enough?

A trimmer assumes you want one piece of one video. Gameplay breaks that assumption in three ways.

  • The file is long. Dragging a handle across a three-hour recording in a window 800 pixels wide moves minutes per pixel. Hitting the exact second a fight starts is close to impossible without zooming, and basic trimmers do not zoom.
  • You want many clips from one file. With a simple trimmer, each clip is a separate pass: open, trim, save a copy, reopen the original, repeat. Ten clips is ten rounds.
  • You do not know where the moments are. A trimmer cannot help you find the play. You scrub until you see it.

A full editor like DaVinci Resolve solves the first two with a real timeline, and how to cut in DaVinci Resolve covers that route. It is a lot of software for picking clips out of a session.

How does GameClip cut gameplay clips?

GameClip is a desktop app for macOS and Windows that turns a gameplay recording into one highlights video and vertical cuts for Shorts, Reels and TikTok. It is built for the case a trimmer handles badly: one long file, many clips.

  1. Click New session and open the recording (MP4, MOV, MKV or WebM, from any recorder).
  2. The whole session appears on a timeline with the sound’s waveform. Zoom with the mouse wheel until a few seconds fill the screen.
  3. Press C for the Cut tool, click where the clip starts, then click where it ends. Repeat for every moment.
  4. Fine-tune a clip by dragging its edges, or with [ and ] to set its start and end at the playhead.
  5. Click Make the cuts to get the highlights video and one vertical cut per clip.

The original file is never changed. If you record with the built-in recorder, pressing F8 while you play marks the last 30 seconds, and those marks are already clips when the session opens. The timeline guide shows the import step.

What it is not: a general trimmer. Clips run from 1 second to 60 seconds, it works on gameplay sessions, and the output is the highlights video and the vertical cuts, not a shortened copy of the whole file. To chop the first ten minutes off a two-hour lecture, use one of the free tools above. GameClip costs $39 once.

Which trimmer should you pick?

Your job Use
Shorten one clip on Windows Photos
Shorten one clip on a Mac QuickTime Player
Cut a long file into parts with no quality loss LosslessCut
Join trimmed clips with titles and music Clipchamp, iMovie or DaVinci Resolve
Trim a small file on a computer that is not yours An online trimmer
Pull many short clips out of a gameplay session GameClip

If the last row is you, download GameClip and open one recording you already have. If you still need the recording, start with how to record gameplay on PC.

FAQ

What is the best free video trimmer?

For a single clip, the one already on your computer: Photos on Windows 11 and QuickTime Player on a Mac. For cutting a big file into several parts without re-encoding, LosslessCut is free and open source on Windows, macOS and Linux.

What is the difference between a video trimmer and a video cutter?

A trimmer shortens a video from its start or its end. A cutter can also remove or keep a piece from the middle and split a file into parts. Many apps use both names for the same tool.

Does trimming a video lower its quality?

It depends on the tool. Most trimmers re-encode the video, which loses a little quality each time. Tools that copy the stream, like LosslessCut, keep the quality exactly, but their cuts land on keyframes.

Can I trim a video without installing anything?

Yes. Windows 11 and macOS both include a trimmer, and browser tools like Clipchamp work with an upload. For large gameplay files, the built-in apps are faster than uploading.

How do I cut several clips out of one long video?

Use a tool with a timeline. A simple trimmer saves one piece per pass. LosslessCut, a video editor, or a gameplay tool like GameClip let you set many segments on one file and export them together.

Contact

Licence keys, billing, bugs and ideas. We reply by email.